a harbor for the things I love to build

AIOcean

Apps and tools I can't stop making, all docked in one place.

See what I've built

the collection

Things I couldn't stop building

Bàn in

  • tool
  • Python
  • 3D printing

A Python toolkit and web viewer for 3D-printable enclosures, with magnet-joined ESP32-C3 SuperMini modules.

Visit project

An ESP32-C3 SuperMini and a few sensors need cases to hold them. A one-off enclosure fits one board in one layout, so each new sensor or battery asks for a new design, and sensor boards that differ by about 1 mm between sellers decide whether a print fits.

The first two enclosures, a bare board and one with an 18650 cell, were one-offs, and the project replaces both. A written standard fixes the grid, the joint and the wire port once, so a new module only has to describe its own interior. Modules pass wires through the joint.

The next module starts from a working template, and dimensions change instead of redrawing. Measure your own board before printing and pull-test one joint first, because fit and magnet pull are not yet tested on real prints. Print preview needs Bambu Studio and targets a Bambu Lab P1S.

  • Turn it any wayA module turns to any angle at a joint and still holds, so a build is not locked to one layout. Plus faces hold four 5 x 1.5 mm magnets per 20 mm unit, minus faces one M6 steel washer.
  • Wires pass throughWires route from one module to the next through the joint itself. Every 20 mm unit of every face has a 5 mm port through the wall, and the magnet or washer pockets sit around it.
  • No broken exportsA bad run cannot overwrite your last good files, so you never print from a half-failed build. Everything is built in a scratch folder first, and files are written only if each part is one valid solid with a closed mesh and every check passes.
  • Preview before printingWatch the sliced print layer by layer before you spend plastic. Layers below the current one are dimmed, and the sidebar shows plastic weight, print time and layer count.

More from the harbor